Electronics Exam

 0    50 fiche    adamsiuda7
Télécharger mP3 Imprimer jouer consultez
 
question réponse
What is static resistance?
commencer à apprendre
It is the resistance calculated using Ohm's law as the slope of the V-I curve from the origin to a working point.
What is dynamic resistance?
commencer à apprendre
It is the small-signal resistance calculated from the change in voltage over the change in current (ΔV/ΔI) at a specific point.
How does temperature affect a standard resistor?
commencer à apprendre
Resistance increases with temperature due to its positive thermal coefficient.
What is a varistor used for?
commencer à apprendre
To protect circuits from overvoltage by decreasing resistance sharply above a threshold.
What does a strain gauge measure?
commencer à apprendre
Mechanical strain, by detecting resistance changes when a conductor is stretched.
How does a thermistor respond to temperature?
commencer à apprendre
Its resistance changes with temperature: NTC decreases resistance, PTC increases it.
What is the function of a photoresistor?
commencer à apprendre
To measure light intensity; resistance decreases as light exposure increases.
State Kirchhoff's Current Law (KCL).
commencer à apprendre
The total current entering a node equals the total current leaving it.
State Kirchhoff's Voltage Law (KVL).
commencer à apprendre
The sum of voltages around any closed loop equals zero.
How does a capacitor behave with frequency?
commencer à apprendre
In AC, impedance decreases with frequency; in DC, it acts like an open circuit.
Define capacitive reactance.
commencer à apprendre
Xc = 1 / (2πfC); it measures how a capacitor resists AC.
What affects capacitance?
commencer à apprendre
Plate area, distance between plates, and dielectric constant of material.
How does an inductor store energy?
commencer à apprendre
In a magnetic field created by current flowing through it.
Define inductive reactance.
commencer à apprendre
XL = 2πfL; it increases with frequency, impeding AC.
What is the Hall effect?
commencer à apprendre
Voltage across a conductor due to a magnetic field acting on moving charges.
What is semiconductor doping?
commencer à apprendre
Introducing impurities to create free carriers in a semiconductor.
How is an N-type semiconductor formed?
commencer à apprendre
By adding atoms with more valence electrons, providing free electrons.
How is a P-type semiconductor formed?
commencer à apprendre
By adding atoms with fewer valence electrons, creating holes.
What is the depletion layer?
commencer à apprendre
A non-conductive region at a PN junction where charge carriers cancel out.
What is forward bias in a diode?
commencer à apprendre
Positive voltage on the anode reduces the depletion layer, allowing current.
What is reverse bias in a diode?
commencer à apprendre
Voltage increases the depletion layer, blocking current flow.
What is the typical forward voltage for a silicon diode?
commencer à apprendre
Approximately 0.7 volts.
What is a Zener diode used for?
commencer à apprendre
Voltage regulation in reverse breakdown mode.
Why use a Schottky diode?
commencer à apprendre
It has a low forward voltage drop and fast switching speed.
What does β represent in BJTs?
commencer à apprendre
The current gain (Ic/Ib).
What does α represent in BJTs?
commencer à apprendre
The ratio of collector current to emitter current (Ic/Ie).
What is the Q-point in a transistor?
commencer à apprendre
The operating point under DC conditions without an input signal.
How does a JFET control current?
commencer à apprendre
By adjusting gate voltage to control the channel width via the depletion layer.
What is pinch-off voltage in a JFET?
commencer à apprendre
The voltage at which drain current levels off and saturates.
What is an enhancement-mode MOSFET?
commencer à apprendre
A transistor that is normally off and requires a positive gate voltage to conduct.
What is a depletion-mode MOSFET?
commencer à apprendre
A transistor that is normally on and turns off with negative gate voltage.
What is a rectifier?
commencer à apprendre
A circuit that converts AC to DC using diodes.
What is ripple factor?
commencer à apprendre
A measure of residual AC in the DC output of a rectifier.
How does a Zener voltage stabilizer work?
commencer à apprendre
It maintains a constant output voltage by operating in reverse breakdown.
What is a current mirror?
commencer à apprendre
A circuit that duplicates current from one active device to another.
What is Total Harmonic Distortion (THD)?
commencer à apprendre
A measure of distortion caused by harmonics in an amplifier's output.
What is Common Mode Rejection Ratio (CMRR)?
commencer à apprendre
The ability of an amplifier to reject common input signals.
What is amplifier slew rate?
commencer à apprendre
The maximum rate of change of output voltage in response to a step input.
What is Signal-to-Noise Ratio (SNR)?
commencer à apprendre
The ratio of signal power to noise power, typically in decibels (dB).
What defines a Class A amplifier?
commencer à apprendre
Continuous conduction for the full cycle, with high linearity and low efficiency.
What defines a Class B amplifier?
commencer à apprendre
Each transistor conducts for half the cycle (180°); more efficient, but causes crossover distortion.
What defines a Class AB amplifier?
commencer à apprendre
Conducts slightly more than 180° to eliminate crossover distortion.
What defines a Class D amplifier?
commencer à apprendre
Uses PWM and switching transistors for high efficiency.
What is an op-amp buffer used for?
commencer à apprendre
Signal isolation with high input and low output impedance.
What does a Schmitt trigger do?
commencer à apprendre
Converts noisy signals into clean transitions using hysteresis.
What is a differential amplifier?
commencer à apprendre
Amplifies the difference between two signals while rejecting common noise.
What is an integrating amplifier?
commencer à apprendre
Produces output proportional to the integral of the input voltage over time.
What is a differentiating amplifier?
commencer à apprendre
Produces output proportional to the rate of change of the input voltage.
What condition is needed for sustained oscillator operation?
commencer à apprendre
Unity loop gain (βk = 1) and zero net phase shift (Barkhausen criterion).
What is the purpose of a DAC (Digital-to-Analog Converter)?
commencer à apprendre
To convert digital signals into corresponding analog voltages.

Vous devez vous connecter pour poster un commentaire.